Panasonic WJ-ND400K Setup Instructions page 16

5
Configure the settings and perform operations
by clicking the buttons and the tabs on the oper-
ation window.
Important:
• If a message is displayed on the information bar,
see page 102.
Note:
• When the top page is displayed for the first time, the
install wizard of the ActiveX control required to dis-
play images from the camera will be displayed.
Follow the instructions of the wizard.
• When ActiveX for WJ-ND200/WJ-ND300 is
installed, remove "WebVideo ActiveX" using the
"Add or Remove Programs" control panel. After
confirming that "WebVideo ActiveX" is deleted,
install ActiveX of WJ-ND400.
• When the install wizard is displayed again even after
completing the installation of the ActiveX, reboot the
PC.
6
Close the web browser when there is no more
operation/settings configuration to be per-
formed.
Click the [X] button at the top right of the window or
shut down the browser.
16