Panasonic WJ-ND400K Setup Instructions page 10

Setup items
Maintenance
Product information
Disk information
Network information
Disk
Settings management
Config.
Disk information
Format
10
Description
Versions of the software, the hardware (this recorder), MAC
address, serial number, temperature inside the recorder and
software version of the connected extension unit will be dis-
played.
Disk partition information of the recorder will be displayed.
Information such as the recording information, operational
mode of the hard disk drives, disk capacities, available capaci-
ty of each recording area, etc. will be displayed.
Network information such as IP addresses of NW camera con-
nected to the recorder, communication rate to network, etc.
will be displayed.
Settings relating to an action to be taken when available
capacity of the hard disk drives run out can be configured, and
data recorded on the hard disk drives can be deleted.
The settings of the recorder can be saved and the saved set-
tings can be loaded to the recorder.
Information such as the recording information, operational
mode of the hard disk drives, disk capacities, available capaci-
ty of each recording area, etc. will be displayed.
Assignment of event recording area and copy area, and for-
matting of the hard disk drives can be performed.
Reference
page
78
79
82
83
85
87
89