About The Operation Window; Display/Close The Operation Window - Panasonic WJ-ND400K Setup Instructions

About the operation window

Display/Close the operation window

Display the operation window using a web browser installed on a PC.
1
Boot the PC.
2
Launch a web browser.
3
After the browser starts, enter the IP address set
to the recorder in the address box, and press the
enter key.
The authentication window will be displayed.
This window will not be displayed when "Off" is
selected for "User authentication" on the "Basic"
tab page of "User management". (Page 70)
Important:
• Refer to a system administrator for the set IP
address of the recorder.
• It is impossible to access the recorder from a PC
which IP address is not registered to the recorder
when "On" is selected for "Host authentication" on
the "Basic" tab page of "User management". (Page
70)
Refer to a system administrator for further informa-
tion.
• Do not attach "0" before the numbers when entering
IP address.
Example:
OK: 192.168.0.50
NG: 192.168.0.050
• If a message is displayed on the information bar,
see page 102.
4
Enter the user name and password registered on
the recorder and then click the [login] button.
The top page will be displayed.
Important:
• Refer to a system administrator for the set user
name and password.
Refer to the "User" section on page 72 for informa-
tion on how to register users.
• The default administrator name and password are
as follows
User name: ADMIN
Password: 12345
• To enhance the security, change the password for
an administrator before running the recorder.
Change the password periodically. Refer to page 72
for information on how to change the password.
• When the recorder is being operated without chang-
ing the user name and password, the pop-up win-
dow saying that it is recommended to change the
password will be displayed.
15