Configure The Settings Relating To The User Management [User Management]; Configure The Basic Settings Relating To User Management [Basic] - Panasonic WJ-NV200K Installation Manual

Configure the settings relating to the user management [User management]

The settings such as user authentication On/Off, administrator registration and operation levels can be configured on the setup
menu - the "Advanced setup" menu - the "User management" page.
The "User management" page has [Basic], [User registration] and [Administrator setup] tabs.

Configure the basic settings relating to user management [Basic]

The settings relating to login when using the mouse, user authentication for network operations, and user levels can be config-
ured on this tab.
■ Operation
Configure the settings to enable auto login when turning on
the recorder.
[Auto login]
Select "On" or "Off" to determine whether or not to activate
the auto login function.
On: Logs in to the recorder automatically.
Off: Does not log in to the recorder automatically. Login
is required when operating the recorder from the
logout status.
Default: On
[Auto login user]
When "On" is selected for "Auto login", the users registered
as auto login users in this setting can log in to the recorder
automatically. An auto login user should be one of the users
registered in the recorder.
Default: ADMIN
[Quick login]
Select "On" or "Off" to determine whether to enter or select
the user name.
Off: User name needs to be entered.
On: Log in by selecting a displayed user name.
Default: Off
[Auto logout]
Set the time to wait until auto logout when no operations are
made while displaying live images.
Off: Does not logout to the recorder automatically. After
1 min/ After 3 mins/ After 5 mins/ After 30 mins
Default: Off
66
Note:
• When "On" is selected for "Auto login", the user will not
be logged out automatically even if other values than
"Off" is selected for "Auto logout".
• To prevent inappropriate operations, it is recommended
to select settings other than "Off" for "Auto logout".
■ Network
Determine whether or not to require user authentication for
operating the recorder from a PC.
[User authentication]
Select "On" or "Off" to determine whether or not to authenti-
cate the user.
On: Login followed by user authentication
Off: Login without user authentication
Default: On
■ User level settings
Set up the operations allowed at each user level (administra-
tor/manager/operator/viewer) by marking the respective
checkboxes. To stop a user from operating certain functions,
do not check the respective function. The setting for the
administrator cannot be changed. The system can also be
set up to allow only live operation (image switching) after log-
out.
Note:
• Only a user logged in as "Administrator" can change the
user level settings.
• At the default, operations allowed at the user level are as
follows:
Administrator/Manager: Possible to perform all the oper-
ations (Administrators)
Operator: Possible to perform a part of the settings of
the recorder and alarm reset (Head of operators)
Viewer: Possible to monitor or play the images
(Operators)
* Administrators and managers can perform all operations.
The difference between an administrator and a manager
is that an administrator has priority over a manager; if
both perform the same operation at the same time, that
of the administrator will have priority.
• The screenshot shows the default.
• When a user tries to operate a function that is not
checked (restricted function), the login window may
sometimes be displayed to prompt a user with the
required user level to log in.