Host - Panasonic WJ-ND400K Setup Instructions

Host

Configure the settings to register PCs (hosts) that can access to the recorder via a network such as a LAN.
Up to 32 hosts can be registered.
1
Click the [User mng.] button.
2
Click the [Host] tab.
The "Host" page will be displayed.
Setup items
■ Host IP address
Enter an IP address.
Enter 4 units from the decimal numbers (0-255).
Note:
• Entering "*" validates all numbers. It is impossible to
register "0.0.0.0" and "*.*.*.*".
■ Level
Select a user level from the following.
Operable functions for each level can be set in the
"Level" menu (page 76).
LV1(default)/LV2/LV3/LV4
■ Access priority
The rank of the priority to operate the recorder in case
multiple users access the recorder simultaneously will
be displayed.
Default: 1
■ Default screen
Select the camera channel from which images are to be
displayed just after login from the following.
Cam.1(default) - Cam.64/Cam.1 - 4/Cam.5 - 8 ...
Cam.61 - 64/Seq
74
3
Configure each setting item.
Refer to "Setup items" mentioned below.
4
Click the [Set] button.
Cam.1 - Cam.64: Live images from the selected cam-
era channel will be displayed on a 1-screen.
Cam.1-4 - Cam.61-64: Live images from the selected
camera channels will be displayed on a 4-screen.
Seq: Images will be displayed sequentially.
■ Camera partitioning
Determine the operational functions of each camera
channel.
View/Operate (default): Both displaying of live/record-
ed images and controlling of the cameras are possi-
ble.
Display: Displaying of live/recorded images is possible,
but controlling of the cameras is impossible.
--: Neither displaying of live/recorded images nor con-
trolling of the cameras are possible.
Important:
• When the host settings are registered, edited or
deleted, do not forget to click the [Set] button to
apply the settings.
Note:
• Even when the [Registration] button is clicked, other
login users will not be logged out.