Maintenance
It is possible to check the status of the recorder and the network, and configure the settings relating to the hard
disk drives.
Product information
Versions of the software and the hardware, MAC address, serial number, temperature inside the recorder and soft-
ware version of the connected extension unit will be displayed.
1
Click the [Maintenance] button.
2
Click the [Product information] tab.
The "Product information" page will be displayed.
Product information
Item
Version information
Software version 1
Software version 2
Hardware version
Software versions of extension units
Ext1 - 5
MAC address
Camera port
Client PC port
Maintenance port
Serial number
Internal temperature
Current temperature
Highest temperature
78
3
Description
Version of software 1 will be displayed.
Version of software 2 will be displayed.
Version of the hardware will be displayed.
Software versions of extension units 1 - 5 will be displayed.
The MAC address of the camera port will be displayed.
The MAC address of the client PC port will be displayed.
The MAC address of the maintenance port will be displayed.
The serial number of the recorder will be displayed.
The current temperature inside the recorder will be displayed.
The highest temperature inside the recorder that was recorded by now since the
power of the recorder was turned on for the first time will be displayed.
Check each item.
Refer to the table "Product information" for informa-
tion about the items.