General Description - Teltonika FM5300 User Manual

SAE J1939 is the vehicle bus standard used for communication and diagnostics among
vehicle components. Based on the same architecture FMS protocol dedicated to telematics
systems is available. It has certain standardized parameters available, such as fuel consumption,
engine work-hours, etc. Please visit
message structure.
The FMS-interface is an optional interface of different truck manufacturers. Supported
information is dependent upon vehicle equipment. For the full information set, additional
Electronic Control Units (ECU) may be required. Please contact the manufacturer or your dealer
for more details.
Vehicle brands supported:
• Mercedes Benz
• Volvo
• MAN
• DAF
• Iveco
• Scania
• Renault
Available parameters:
• Total Fuel
• Total Distance
• Status of brake pedal *
• Engine Torque *
• Actual fuel
• Accelerator pedal position *
• Status engine brake
• Speed *
• RPM
• Engine hours
• Vehicle Weight *
• Fuel level
• Tachograph data *

13.1 General description

CAN works if no USB cable is inserted and isn't in deep sleep mode;
Uses six different speeds: 50 kbps, 100 kbps, 125 kbps, 250 kbps, 500 kbps;
Auto Baud rate detection;
Filtering messages (StId, ExtId) according to configuration;
Using mask, filters required bytes;
Different CAN configurations.
http://www.fms-standard.com/ for more information and
89