Teltonika FM5300 User Manual page 34

Ignition source settings, for choosing which ignition source prefer to use DIN1 or
External Voltage. While using External Voltage must to set levels.
When Vehicle Generator is working supply voltage is usually 2V – 4V volts higher than when it
not.
Ignition from power voltage cannot be used for:
Immobilizer Scenario
Authorized Driving Scenario
While generator is working, it is to late block engine.
If ignition from power voltage is selected, DIN1 value will be ignored for these functionalities:
Sleep
Deep Sleep
Trip
Autogeofence
Odometer
Eco Driving
Green Driving
Static Navigation
Ignition is 1, when power voltage is within high and low levels
Example:
High Level: 15000
Low Level: 13000
If External Voltage 14V, then ignition is ON.
If External Voltage 12V, then ignition is OFF.
If External Voltage 16V, then ignition is OFF.
Figure 23 System Settings Configuration
34