Settings And Configurable Parameters Menu; System Settings - Teltonika FM5300 User Manual

Parameter Name
GNSS Settings Allows choosing compatibility mode and satellite System.
COM1 Settings Allows configuring COM1 baud rate, parity and flowing control.
Allows configuring COM2 baud rate, parity mode, end line, binary
COM2 Settings
timeout and 3 prefixes.
When two or three temperature sensors are connected to FM5300 it is
necessary to define sensor ID to certain property separately. This way
Temperature
FM5300 will know which temperature sensor is which property.
Settings
FM5300 automatically updates ID's field if any sensors are connected
while configuring device via configurator.
Continuous Allows enabling or disabling functionality and start value setting.
Odometer settings
Garmin settings Allows enabling or disabling functionality and Unicode.
In effect only if LLS mode is selected on both COM1 and COM2
Possible values:
0- Use of polynoms DISABLED. (default). To server will be send raw LLS
Dual LLS mode
1- Use of polynoms ENABLED. Polygonoms will be applied on LSS1 and
Note: Sanity check of polynoms values are still in effect, so if polynoms
are invalid then sending will default to RAW LLS values sending.
It was working automatically by default. With 01.06.00 version this
Backup Mode behavior is configurable. It is useful to have more manual control. It
also allows with single SMS to go back to older working configuration.

Settings and configurable parameters menu

Every FM53 profile has four main groups of parameters:
1. System – main parameters for all device;
2. GSM has 3 subgroups
a. GPRS
b. SMS
c. OPERATOR LIST
3. Features
4. I/O

7.3.1.1 System Settings

System settings have 2 configurable parameter (Figure 23):
Sleep settings, where user can disable sleep, turn on or deep sleep.
Parameter description
values.
LLS2 values.
33