Teltonika FM5300 User Manual page 130

getcfgtime Date and Time of last successful configuration
getgps Current GPS data and time
loadprofile# Load specified profile into RAM Engine Profile. # - number of profile to load
cpureset Reset CPU
resetallprof Reset all FLASH profiles to default profile
getver Device / Modem / Code version information
getinfo Device runtime system information
deleterecords Delete all records saved on FLASH
getio Readout digital inputs and outputs, analog inputs
readio # Readout input value according entered ID, # - ID value
setdigout Set digital outputs
XXXX Y1 Y2 Y3 0 – OFF, 1 – ON
Y4 Y1 – timeout for DO1
Y2 – timeout for DO2
Y3 – timeout for DO3
Y4 – timeout for DO4
getparam # Readout parameter value according entered ID.
# - ID value.
Setparam # # Set parameter value according entered ID and Value.
1.# - ID value.
2.# - New Parameter Value
flush Initiates all data sending to specified target server
#,#,#,#,#,#,# 1.# - IMEI
2.# - APN
3.# - LOGIN
4.# - PASS
5.# - IP
6.# - PORT
7.# - MODE (0-TCP/1-UDP)
sn x [x=0;1] Enable/disable static navigation
banlist Banlist information
crashlog Crash log information
delete_all_sms Delete all read SMS
braminfo BatRam info
getgnss Current GNSS information
resetlimits Resets data counters
ATTENTION!
In order to send these commands, they have to be converted to special format.
How to convert to this format and for additional information on how to send
GPRS commands, please contact to your local sales representative.
130