Lls Sensor - Teltonika FM5300 User Manual

NOTE: Garmin FMI protocols are supported only in TCP data transfer mode.
Garmin Fleet management Interface documentation can be downloaded from
Official Garmin web page:
5.zip.
Software version updates: http://www8.garmin.com/support/download.jsp.
For more information about Garmin PND device connectivity to FM5300 and additional
information, please contact to your local sales representative.

15 LLS SENSOR

LLS sensor series liquid level sensors are solid-state capacitive devices with no moving
parts. The sensors use capacitive technology to produce accurate liquid level measurements of
standard factory grade DIESEL OIL and PURE GASOLINE (BENZINE) carbon fuels.
The LLS sensor liquid level sensors are strictly prohibited to use in any liquids which are not
the factory grade carbon fuels or contain: BIOFUEL, METHANOL, ETHANOL, UREA and similar
aggressive components in pure form or as additives for factory grade carbon fuels for use in
INTERNAL COMBUSTION ENGINES. Operating media – Diesel fuel (oil), pure gasoline (benzene).
IMPORTANT!
The power supply is 10-50 VDC stabilized. The wrong polarity (-) or (+)
connection of power supply will damage or destroy the device. Prohibited for
test or use in water and any other liquids, which are not factory grade carbon
fuels. Fit the plastic insulation cap on the end of the central rod after
Figure 76 Configuration of Garmin in Global parameter settings
http://developer.garmin.com/download/FMI_v2-
119