Teleprotection Inputs; Contact Outputs; Virtual Outputs - GE D60 Instruction Manual

6.2 STATUS
PATH: ACTUAL VALUES
TELEPROTECTION
INPUTS
The present state of teleprotection inputs from communication channels 1 and 2 are shown here. The state displayed will
be that of corresponding remote output unless the channel is declared failed.
PATH: ACTUAL VALUES

CONTACT OUTPUTS

6
The present state of the contact outputs is shown here. The first line of a message display indicates the ID of the contact
output. For example, 'Cont Op 1' refers to the contact output in terms of the default name-array index. The second line of
the display indicates the logic state of the contact output.
For Form-A outputs, the state of the voltage(V) and/or current(I) detectors will show as: Off, VOff, IOff, On,
VOn, and/or IOn. For Form-C outputs, the state will show as Off or On.
NOTE
PATH: ACTUAL VALUES

VIRTUAL OUTPUTS

The present state of up to 96 virtual outputs is shown here. The first line of a message display indicates the ID of the virtual
output. For example, 'Virt Op 1' refers to the virtual output in terms of the default name-array index. The second line of the
display indicates the logic state of the virtual output, as calculated by the FlexLogic™ equation for that output.
6-4
STATUS

TELEPROTECTION INPUTS

TELEPROTECTION
INPUT 1-1: Off
TELEPROTECTION
MESSAGE
INPUT 1-2: Off
TELEPROTECTION
MESSAGE
INPUT 1-16: Off
TELEPROTECTION
MESSAGE
INPUT 2-1: Off
TELEPROTECTION
MESSAGE
INPUT 2-2: Off
TELEPROTECTION
MESSAGE
INPUT 2-16: Off
STATUS CONTACT OUTPUTS
Cont Op 1
Off
Cont Op xx
MESSAGE
Off
STATUS VIRTUAL OUTPUTS
Virt Op 1
Off
Virt Op 96
MESSAGE
Off
D60 Line Distance Relay
Range: Off, On
Range: Off, On
↓
Range: Off, On
Range: Off, On
Range: Off, On
↓
Range: Off, On
↓
↓
6 ACTUAL VALUES
6.2.4 TELEPROTECTION INPUTS
6.2.5 CONTACT OUTPUTS
6.2.6 VIRTUAL OUTPUTS
GE Multilin