GE D60 Instruction Manual page 90

4.2 FACEPLATE INTERFACE
g) INVALID PASSWORD ENTRY
In the event that an incorrect Command or Setting password has been entered via the faceplate interface three times within
a three-minute time span, the
Settings or Command access via the faceplate interface for the next ten minutes. The
flash message will appear upon activation of the ten minute timeout or any other time a user attempts any
FOR 10 MIN!
change to the defined tier during the ten minute timeout. The
"Off" after the expiration of the ten-minute timeout.
In the event that an incorrect Command or Setting password has been entered via the any external communications inter-
face three times within a three-minute time span, the
the D60 will not allow Settings or Command access via the any external communications interface for the next ten minutes.
The
REMOTE ACCESS DENIED
4
4-14
FlexLogic™ operand will be set to "On" and the D60 will not allow
LOCAL ACCESS DENIED
REMOTE ACCESS DENIED
FlexLogic™ operand will be set to "Off" after the expiration of the ten-minute timeout.
D60 Line Distance Relay
TOO MANY ATTEMPTS – BLOCKED
FlexLogic™ operand will be set to
LOCAL ACCESS DENIED
FlexLogic™ operand will be set to "On" and
4 HUMAN INTERFACES
GE Multilin