GE D60 Instruction Manual page 175

5 SETTINGS
reach impedance defined by the
defined by
PHS DIST Z1 REV REACH
• PHS DIST Z1 SHAPE: This setting selects the shape of the phase distance function between the mho and quadrilat-
eral characteristics. The selection is available on a per-zone basis. The two characteristics and their possible varia-
tions are shown in the following figures.
Figure 5–40: DIRECTIONAL MHO DISTANCE CHARACTERISTIC
Figure 5–41: NON-DIRECTIONAL MHO DISTANCE CHARACTERISTIC
GE Multilin
and
PHS DIST Z1 REACH PHS DIST Z1 RCA
and
PHS DIST Z1 REV REACH RCA
X
DIR COMP LIMIT
DIR RCA
RCA
X
RCA
REV REACH
RCA
D60 Line Distance Relay
5.5 GROUPED ELEMENTS
settings, and the reverse reach impedance
as illustrated below.
COMP LIMIT
DIR COMP LIMIT
R
837720A1.CDR
COMP LIMIT
R
837800A1-X1.CDR
5
5-85