Section 1 Overview
1.2 I/O Configuration and Main Functions
■ I/O Configuration
● E5CSV and E5CS-U
Temperature
input
* Functions can be assigned individually for each output by changing the set
■ Basic Model Number
● Models with Terminal Blocks
E5CSV - @ @ @ @ -@
● Plug-in Models
E5CS - @ @ @ @ U-@
A functional explanation is provided here for illustration, but models are not necessarily
available for all possible combinations. Refer to the catalog when ordering.
■ Main
Functions
● Input Sensor
Types
1-4
Control function
Alarm 2 function
Control
section
Alarm 1 function
values for the control output assignment, the alarm 1 assignment, and the
alarm 2 assignment in the initial setting level.
Case color
Voltage specifications Blank: 100 to 240 VAC
Input type
Alarm output
Control output R
Case color
Voltage specifications Blank: 100 to 240 VAC
Input type
Alarm output
Control output R
This section introduces the main E5CSV/E5CS-U functions.
For details on particular functions and how to use them, refer to
SECTION 3 and following sections.
Thermocouple:
Platinum resistance:
thermometer
Thermistor:
Multi-input (thermocouple/platinum resistance thermometer) models:
Blank: Black
K,J : Thermocouple (K, J)
P
: Platinum resistance thermometer
G : Thermistor
T
: Multi-input
(thermocouple/platinum
thermometer) models
Blank : None 1 : One output
: Relay
Q : Voltage output (for driving the SSR)
Blank: Black
K,J : Thermocouple (K, J)
P
: Platinum resistance thermometer
G : Thermistor
T
: Multi-input
(thermocouple/platinum
thermometer) models
Blank : None 1 : One output
: Relay
Q: Voltage output (for driving the SSR)
K, J, L
Pt100, JPt100
E52-THE@@
K, J, L, T, U, N, R, Pt100, JPt100
Control output
Alarm output 2
Alarm output 1
W : Light gray
D : 24 VAC/VDC
resistance
2 : Two outputs
W: Light gray
D: 24 VAC/VDC
resistance
2 : Two outputs