Table of Contents
Advertisement
K1048-RT Microserver User's Manual
6-5
Installing and Replacing Hard Drives
The chassis can contain twelve 3.5" fi xed hard disk drives. Each HDD position in
the chassis is labeled with a number that corresponds to the persistent drive bay
enumeration.
The drives rest on metal brackets that runs the full width of the chassis. They attach
to the system by means of cables individually connecting power and Ethernet using
standard SAS HDD connectors. Ethernet drives re-purpose the standard SAS HDD
connector. Please see manufacturer specifi cations.
Refer to the Quick Start Sticker that is mounted in the top cover of the K1048-RT
for information on quick starting the system for use and replacing HDDs.
Figure 6-3. Quick Start Sticker
6-4
Advertisement
Table of Contents
