Table of Contents
Advertisement
K1048-RT Microserver User's Manual
3-2
Control Panel Buttons
The chassis includes two push-buttons that control power to the system.
Power: The main power switch is used to apply or remove power from the power
supply to the server. Turning off system power with this button removes the main
power but maintains standby power.
Reset: The reset button is used to reboot the system.
3-3
Control Panel LEDs
There are fi ve LEDs that provide status information about the system.
UID LED: The uiniversal identifi er (UID) blue LED is activated from the mainboard.
It is used to locate the server in large racks and server banks.
NIC: Indicates network activity when fl ashing.
3-2
Advertisement
Table of Contents
