Table of Contents
Advertisement
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the K1048-RT. Installation and
maintenance should be performed by experienced technicians only.
The K1048-RT is a high-end Microserver unit based on the SC801LTS-R406KP
1U rackmount server chassis, a dual 10G Broadcom BMC-53347 LAN switch and
twelve (12) internal hot-swap Ethernet 3.5" HDD drives. The K1048-RT has an
IPMI LAN port, two 10G LAN ports, a serial management port and two redundant
400 Watt power supplies.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with
the server system and describes the main features of the mainboard and the
SC801LTS-R406KP chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the Microserver K1048-RT into
a rack and check out the confi guration prior to powering up the system.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: System Safety
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
Microserver K1048-RT.
Chapter 5: Advanced Serverboard Setup
Chapter 5 provides detailed information on the mainboard, including the locations
and functions of connections, headers and jumpers.
Preface
iii
Preface
Advertisement
Table of Contents
