Table of Contents
Advertisement
K1048-RT Microserver User's Manual
5-2
Mainboard Details
Figure 5-2. K1048-RT Layout and Drive Enumeration
Notes:
1. Use only the correct type of onboard CMOS battery as specifi ed by the
manufacturer. Do not install the onboard battery upside down to avoid
possible explosion.
2. When the Onboard Power LED on the front control panel is on, the system
power is on. Unplug the power cable before installing or removing any
components.
3. Changing BMC IP address and log-in information is required to avoid address
confl icts if setting up more than one unit on your network.
4. Upon system bootup, the default IP address is 192.168.1.99, change this to
an available IP address on your network. The default username is ADMIN and
password is ADMIN.
5. For BMC best practices, please refer to:
nfo/fi
les/IPMI/Best_Practices_BMC_Security.pdf.
Connector
JLAN1~4
IPMI Port
12
11
10
Description
10-Gigabit Ethernet LAN Ports
IPMI Ethernet Port
8
7
6
9
5
http://www.supermicro.com/products/
5-2
4
3
2
1
Advertisement
Table of Contents
