Table of Contents
Advertisement
1-1
Overview
The K1048-RT Microserver is a high-end switch/storage server comprised
of three main subsystems: the SC801LTS-R406KP 1U server chassis the
Broadcom BMC-53347 switch system and twelve (12) 3.5" Ethernet hard drives.
Please refer to our web site for information on operating systems that have been
certifi ed for use with the system (www.supermicro.com).
An illustration of the overview IP assignment fl ow for this switch/storage server is
shown below.
In addition to the system mainboard and chassis, various hardware components
have been included with the K1048-RT server, as listed below:
•
Six (6) 40x28-mm 13K RPM 4-pin PWM fans (FAN-0065L4)
•
One (1) 85-cm 16-pin to 16-pin ribbon 28AWG front control cable
(CBL-CDAT-0648)
•
Two (2) 8-pin to 3 2x2(10-cm) power cable for SC801L (CBL-PWEX-0636)
Chapter 1
Introduction
Figure 1-1. Overview IP Assignment Flow
tolerance and key/value data placement.
1-1
Chapter 1: Introduction
Storage System Manager
(Object Storage Platform)
Using the API, this platform sets fault
Advertisement
Table of Contents
