Chapter 6: Advanced Chassis Setup
6-4
Removing the Chassis Cover
The system is fully accessible by removing the two chassis covers. Each is secured
by a small metal lip in the middle of the chassis and by two thumb screws on the
front or rear of the chassis.
Figure 6-2. Removing the Chassis Cover
Thumbscrews
Edge fi ts under the lip in the
middle of the chassis
Thumbscrews
Removing a Chassis Cover:
1. Loosen the two thumb screws on the front or rear of the chassis.
2. Slide the cover away from the middle and off.
Caution: Except for short periods of time, do not operate the system without the
cover in place. The chassis cover must be in place to allow proper airfl ow and
prevent overheating.
6-3