Table of Contents
Advertisement
Installing Hot-Swap 3.5"/2.5" Hard Drives
The chassis uses tool-less drive carriers to simplify the installation of 3.5" hard drives into
the drive trays. Dummy trays feature a built-in adapter to support 2.5" drives.
1
3
Note: Enterprise level hard disk drives are recommended for use in Supermicro chassis and
servers. For information on recommended HDDs, visit the product pages on the Supermicro
website.
Chapter 3: Maintenance and Component Installation
Drive Carrier Handle
Figure 3-7. Removing a 3.5" Drive Carrier
49
Advertisement
Table of Contents
