Installing Oracle Solaris On A Single System Manually - Oracle X6-2 Installation Manual

Installing Oracle Solaris on a Single System Manually

Select the console display option and set it up prior to performing the installation. For
■
more information about this option and setup instructions, see
Display" on page
Verify that the UEFI firmware settings are set to the optimal defaults. For instructions
■
on how to verify and, if necessary, set the UEFI firmware settings, see
Optimal Defaults" on page
Set the UEFI firmware to the desired boot mode, Legacy BIOS or UEFI. For instructions on
■
how to set the UEFI Boot Mode, see
Select the boot media option and set it up prior to performing the installation. For more
■
information about this option and setup instructions, see
Option" on page
Determine the storage drive to be used as the installation target option and set it up prior
■
to starting this installation procedure. For more information about this option and setup
instructions, see
Gather the Oracle Solaris operating system (OS) documentation so that you can use it
■
in conjunction with the instructions provided in this section. Oracle Solaris 11.3 OS
documentation is available at:
http://docs.oracle.com/cd/E53394_01/index.html
Installing Oracle Solaris on a Single System Manually
This section provides guidelines for installing the Oracle Solaris 11.3 operating system.
"Install Oracle Solaris Using Local or Remote Media" on page 29
■
"Install Oracle Solaris Using PXE Network Boot" on page 32
■
"Post Installation Tasks for Oracle Solaris Operating Systems" on page 36
■
Related Information
"About Oracle Solaris Operating Systems Installations" on page 9
■
28 Oracle Server X6-2 Installation Guide for Oracle Solaris Operating System • January 2017
13.
16.
"Set the Boot Mode" on page
22.
"Selecting the Installation Target" on page
"Selecting the Console
"Verify the UEFI
19.
"Selecting the Boot Media
24.