Setting Up Your Camera; Turning The Power On; Setting The Date And Time - Epson R-D1 User Manual

Setting Up Your Camera

Turning the power on

1. Turn the power switch to the on position.
When you turn your camera on, information about current settings
(number of remaining photos, photo quality, remaining battery
power, and white balance settings) is indicated on the status gauge
on the top of the camera. For details, see "About the Status Gauge"
on page 23.
19
Getting Started
Downloaded from ManualsCamera.com Manuals
Note:
To turn the power switch off, turn it to the off position.

Setting the date and time

When you turn on the camera the first time, you need to set the current
date (month, day, and year) and time (hours and minutes) on the LCD
monitor. Once these settings are made, the camera automatically
records the date and time each time an image is taken.
Note:
❏ If you remove the battery from the camera, the date and time settings will
be erased approximately two days after the time the camera was last used.
❏ After changing the battery, make sure that the date and time is set
correctly. If necessary, set the date and time again.
❏ You can change the settings later using the Basic Setup menu. For details,
see "Basic Setup menu" on page 42.
Follow the steps below to set the date and time.
1. Turn the power switch on.
2. Invert the LCD display toward you and press the LCD button. The
Time and Date screen is displayed on the LCD display.
For details about inverting the LCD monitor, see "How to Use the
LCD Display" on page 40.