Table of Contents
Advertisement
2.
Spread lubricant onto the inside surface of belt and deck evenly (make sure the machine
and power is disconnected).
3.
Periodically lubricate the front
If
the treadmill belt/deck/roller is kept reasonably clean it is possible to expect over 1200 hours before
additional re-lubing is necessary.
4 Ho
w o check the running mat for prope
t
1.
Disconnect the main power supply.
2.
Fold the treadmill up into the storage position.
3.
Feel the back surface of the running mat.
If the surface is slick when touched, then no further lubrication is needed.
If the surface is dry to the touch, apply a suitable silicone lubricant.
We recommend you use
purchased from your local sports Retailer or a local hardware store.
5 Belt Adjustment
Belt Tension Adjustment
steady running surface. Adjustm
tension w
ith the Allen Key provided in the parts package. The adjustment bolt is
rails as noted
in diagram below:
Left bolt
SPORTZ
and rear rollers to keep them at there peak performance.
a silicone based spray to lubricate your Lifespan Treadmill. This Can be
-It is very important for joggers and runners in order to provide a smooth,
ent must be made from the right and left rear roller in order to adjust
Note: Adjustment is thru small hold of end cap.
r lubrication:
- 21 -
is turned off
located at the end of the
Right bolt
Advertisement
Table of Contents
