LifeSpan SPORTZ Owner's Manual page 7

STEP (3):
STEP (4):
STEP (4):
CAUTION:
1. DO NOT PLUG IN POWER CORD UNTIL FINAL ASSEMBLY IS COMPLETED AND MOTOR COVER
IS INSTALLED.
SPORTZ
3. Cross the upright connected tube (1)
into plastic cover (118) and insert it into
the left upright (3).
4. Repeat the step 3, cross the upright
connected tube (1) into plastic cover (118)
and insert it into the right
5. Lock the upright connected tube into
the left and right upright with screw M6*10
(32).
6. Connect the right cable of the computer (5)
and the cable of the right upright (4) firstly.
Insert computer left handlebar board into left
upright (3) and right upright (4). Connect them
with the bolts M10*20 (38) and flat washer
(14).
7. To lock the computer right fixed board into
the right upright (4).
CAUTION: Tighten all the bolts again.
- 7 -