Table of Contents
Advertisement
The mat/deck friction may play a major role in the function and life of your treadmill and that is why we
recommend you constantly lubricate this friction point to prolong the useful life of your treadmill.
Lubrication is provided with this unit. You should apply the enclosed lubrication after approximately the
first 50 hours of operation. We recommend lubrication of the deck according to the following timetable:
Light use (less that 3 hours per week) every 6 months
Medium use (3-5 hours a week) every 3 months
Heavy use (more than 5 hours per week) every 6-8 weeks.
See below procedures for lubricating:
1.
Use a soft, dry cloth to wipe the area between the belt and deck.
2.
Spread lubricant onto the inside surface of belt and deck evenly (make sure the machine is turned off
and power is disconnected).
3.
Periodically lubricate the front and rear rollers to keep them at there peak performance.
If the treadmill belt/deck/roller is kept reasonably clean it is possible to expect over 1200 hours before
additional re-lubing is necessary.
5 How to check the running mat for proper lubrication:
1.
Disconnect the main power supply.
2.
Fold the treadmill up into the storage position.
3.
Feel the back surface of the running mat.
If the surface is slick when touched, then no further lubrication is needed.
If the surface is dry to the touch, apply a suitable silicone lubricant.
We recommend you use a silicone based spray to lubricate your Lifespan Treadmill. This Can be
purchased from your local sports Retailer or a local hardware store.
6 Belt Adjustment
Belt Tension Adjustment
steady running surface. Adjustment must be made from the right and left rear roller in order to adjust
tension with the Allen Key provided in the parts package. The adjustment bolt is located at the end of the
ENTERTAINER
-It is very important for joggers and runners in order to provide a smooth,
23
- -
Advertisement
Table of Contents
