Vehicle Lap Belt Only - Britax ONE4LIFE CLICKTIGHT Series User Manual

REAR-Facing Installation with Vehicle Lap Belt Only
1. Place child restraint
REAR-facing on the
vehicle seat so that the
bottom of the base sits
flat on the vehicle seat.
2. Recline child restraint to
the appropriate position.
Refer to page 15 to
determine appropriate
recline position.
3. Ensure that no more
than 3 in (7.6 cm) of the
base hangs over front
edge of the vehicle seat.
4. Open the CLICKTIGHT
door. Squeeze the
CLICKTIGHT release
buttons underneath the
front cover flap and lift to
open.
3"
25