Introduction - Britax Safe-n-sound Tourer Instruction Manual

INTRODUCTION

Carefully read all the instructions for installation. If in doubt about the method of
installation, consult Britax Childcare or agent or a child restraint fitter or, in New
Zealand, consult the agent for the vehicle.
There is no requirement to attach this booster seat to the car's child restraint
upper anchorage fitting.
THIS RESTRAINT MUST BE USED IN CARS WITH FORWARD FACING
SEATS WITH A LAP-SASH SEATBELT OR WITH A SEATBELT AND CHILD
HARNESS. When used with a Child Harness either lap only seatbelt or lap-
sash seatbelt may be used.
This booster seat should be use in the rear seating position wherever
possible as this is a safer position.
Suitable for use with the following child harnesses:
Safe-n-Sound Protecta PLUS™ harness Series 220/2010 and 220/2013.
Babylove EzyGo Harness™ Series BL220/2010 and BL220/2013.
No child restraint can guarantee absolute protection from injury in every crash.
However, to ensure that your child gets all the protection designed into the
restraint PLEASE READ AND FOLLOW THESE INSTRUCTIONS EXACTLY.
This child restraint is not suitable for use on an aircraft.
Always store the instruction book in the pocket provided on the side of the
headrest.
8
Instructions for Installation & Use - Series No. 4000/A/2013