Table of Contents
Advertisement
Using the menus
The projector is equipped with On-Screen Display (OSD) menus for making various
adjustments and settings.
The OSD screenshots below are for reference only, and may differ from the actual design.
Below is the overview of the OSD menu.
1
PICTURE
2
Image Mode
User Mode Settings
Brightness
3
Contrast
Color
Tint
Sharpness
Advanced
Reset Current Image Mode
4
To access the OSD menu, press MENU on the projector or remote control.
• Use the arrow keys ( / / / ) on the projector or remote control to move through the menu
items.
• Use OK on the projector or remote control to confirm the selected menu item.
Switching input signal
The projector can be connected to multiple devices at
the same time. However, it can only display one full
screen at a time. When starting up, the projector
automatically searches for the available signals.
Be sure the SYSTEM SETUP: BASIC > Auto Input
Search menu is On if you want the projector to
automatically search for the signals.
To select the source:
1. Press INPUT. A source selection bar appears.
2. Press
/
until your desired signal is selected and
press OK.
Once detected, the selected source information will
appear at the corner of the screen for seconds. If
there is multiple equipment connected to the
projector, repeat steps 1-2 to search for another signal.
The brightness level of the projected image will change accordingly when you switch between
different input signals.
34
Operation
Standard
5
6
Exit
Main
Current input
1
4
menu icon
signal
Main
Status
2
5
menu
Button
Sub-menu
operation
3
6
guidance
Input
Advertisement
Table of Contents
