Detecting A Usb Mouse; Updating The Product Firmware With A Usb Memory - Canon Rayo S1 User Manual

2.
Connect a USB memory to the USB terminal of the product (USB-A).
3.
When the USB memory is detected as external memory, you will have
permission to read and write data within the USB memory.
Detecting a USB mouse
1.
Turn on the device in Projector mode.
2.
Connect the projector to a USB mouse.
3.
When a mouse is recognized, it can be used just like your touchpad.
Updating the product firmware with a USB
memory
Note
• During file transmission, do not separate the USB memory. It can damage data and
the product.
• Updates requires a minimum of 30% battery level, so make sure to connect to an
authentic charger (DC 5V/2A) to successfully run an update.
1.
Turn on the device in Projector mode.
Note
For more information on how to turn on Projector mode, see "Turning on in
Projector Mode" on page 14.
2.
Before updating, check the software build version installed in the device.
You can check the build number in Settings : Device Information.
3.
If you have any queries on the update software, please contact our customer
support.
Note
Check if the build number of the software to update later than the currently installed
version.
4.
Rename the received update file to "update.zip".
39
Rayo S1
User Manual