System Settings - Canon WUX6010 User Manual

System settings

Customize projector and remote control operation, beeping, and other
details after startup, during standby, and in other situations.
(When the input signal is Analog PC-1)
Menu
User screen settings
Interface settings
Power management
mode
Power management
duration
Direct power on
Beep
Motion blur reduction
Language
Other settings
Function
Customize user screens shown at startup, when no
signal is detected, and in other situations.
Specify interface details such as settings for input
signals of connected equipment.
You can specify to turn the lamp or projector off
automatically after a certain period if the projector and
remote control are not used, or if there is no input
signal.
Specify how long before the lamp is turned off or the
projector enters standby, depending on the [Power
management mode] setting.
You can turn on the projector by connecting the power
cable without pressing the POWER button.
You can select whether a beep sounds or not when you
operate the projector.
Motion blur is blurring that occurs during video
playback. Motion blur reduction can make this blurring
less noticeable.
You can select the language in which the menus are
displayed.
Set a password, reset counters for lamp or air filter
replacement, and access other settings and
information.
107
Menu Description
Details
P108
P109
P112
P113
P113
P113
P114
P114
P115