Install Ie Tab For Firefox 42; Port Forwarding - Wansview W1 User Manual

8.4 Install IE Tab for Firefox 42

Due to the fact that Firefox42 and higher no longer supports NPAPI plug-in, the user needs to add an IE tab for Firefox.
Here is how to install an IE Tab for Firefox:
1. Please visit https://addons.mozilla.org/en-US/firefox/addon/ie-tab/
2. Open Firefox, right click and choose "View Page in IE Tab". Then you can view the live stream of the camera.

8.5 Port Forwarding

Every time you reboot the camera, the Local IP Address will be changed, so you'd better set the camera's local IP by using the
SearchPro tool (on the CD).
There are two ways to do port forwarding:
1. One router connected (only one router is being used, and the router is directly connected to the WAN)
Log on the router, find the Port forwarding (or Port Mapping or Virtual Server), then add the camera's local IP and Port as in the
figure below:
Support Email/ Skype: service2@wansview.com
to download the IE Tab for Firefox.
Figure 8.4.1
Figure 8.4.2
58