Sd/Tf Card Setting; Reboot Camera; About Camera - Wansview W1 User Manual

3.4.4.6 SD/TF Card Setting

3.4.4.7 Reboot camera

3.4.4.8 About Camera

Support Email/ Skype: service2@wansview.com
Click to enter 【 E-Mail Setting 】 , when the user is using the mail alarm
function, Sender, Receiver, SMTP Server, SMTP Port(common port is
25,465 and 587), TLS etc. can be set.
Notice：
*User can select SMTP server according to your Mailbox server, if not in
the listed, please input manually.
*The Authentication must be ON, or the camera cannot log to the sender
email to send email.
* Please select SSL or TLS when the SMTP Port is 465 and 587.
Click to enter "SD/TF Card Setting". User can check the SD card capacity and
status.
Enable the "record overwrite", the new recorded files will overwrite the old files
automatically.
The record time length can be set between 2-15 minutes
Enable the SD card recording, the camera will record constantly. For example, if
record time set at 2 minutes, the camera will record every 2 minutes
1. Please perform SD card formatting before SD card recording.
2. If SD card formatting is required during video recording, please stop SD card
recording first.
3. Built in 8GB SD Card, and Support Max.64GB Micro SD card.
The duration of SD card formatting is about 20s.
Tap "reboot camera", user can restart
the camera.
20