Alarm Action; 5Armed Time; Log - Wansview W1 User Manual

5.3.5.4 Alarm Action

5.3.5.5Armed Time

5.3.7 Log

Support Email/ Skype: service2@wansview.com
Enter"Alarm Action" to respond to abnormalities detected by
IO detection/motion detection/audio detection etc ， and
execute a variety of alarm actions at linkage ： snapshot and
sending via Email, snapshot and uploading to FTP, video
uploading to FTP, snapshot saving to SD card, video saving
to SD card, linkage IO output and linkage pan/tilt preset
position.
Reminder: The method of "Combination Triggered Alarm"
among alarm trigger types:
If the user starts up an Audio Detection Alarm and Motion
Detection Alarm, the "Combination Triggered Alarm" will
be started up. Only when any abnormality is detected
simultaneously by the Audio Detection Alarm and Motion
Detection Alarm will the Alarm Action be triggered.
After setting the type of Alarm Detection and Alarm
Action, you will enter Armed Time setting. Alarm
Action can only be triggered when armed; the time
system is 7d*24h, 15min. intervals. The camera default
is open 24 hours. The user can drag the mouse to
perform continuous selection of the arming time.
Enter "Log". The user can check the
functional operation log of the camera.
44