Symbol WS5000 Troubleshooting Manual page 41

Table 3.1 Network Event Message/Parameter Description Lookup (Continued)
ID Event Message
12 AP status Adopted an access port <XX>.
[adopted]
Radio <XX> with Mac <YY> is adopted.
13 AP status [reset] Radio <XX> with MAC <YY> was reset.
Reset the access port <XX>.
14 AP config failed Radio <XX> <YY> no ESS - configuration
[wrong ESS] FAIL.
15 AP max MU count MUs for this RF port are over margin: <XX>.
reached
16 AP detected Detected a new access port <XX>.
17 Device msg Dropping DeviceInfo message from <XX>
dropped [info] whose parent is <YY>.
debug
18 Device msg Dropping Loadme message from <XX>
dropped [loadme] whose parent is <YY>.
19 Ether port Ethernet Port <XX> is connected.
connected
20 Ether port Ethernet port <XX> disconnected.
disconnected
21 MU assoc failed ACL denied MU (XX) association.
[ACL violation]
22 MU assoc failed Access port refused MU <XX> association.
Error <YY>.
23 MU status Mobile Unit <XX> was associated to access
[associated] port <YY>.
Network Events
Parameters
XX = MAC (xx:xx:xx:xx:xx:xx) address of the
access port.
XX = Access port name (string).
YY = MAC (xx:xx:xx:xx:xx:xx) address of the
access port.
XX = Name (string) of the radio.
YY = MAC (xx:xx:xx:xx:xx:xx) address of the
radio.
XX = MAC (xx:xx:xx:xx:xx:xx) address of the
access port.
XX = Name (string) of the radio.
YY = MAC (xx:xx:xx:xx:xx:xx) address of the
radio.
XX (integer ) = Number of MUs associated
to this access port.
XX = MAC (xx:xx:xx:xx:xx:xx) address of the
access port.
XX = MAC (xx:xx:xx:xx:xx:xx) address of the
access port.
YY = MAC (xx:xx:xx:xx:xx:xx) address of the
switch to which the access port is adopted.
XX = MAC (xx:xx:xx:xx:xx:xx) address of the
access port.
YY = MAC (xx:xx:xx:xx:xx:xx) address of the
switch to which the access port is adopted.
XX = Ethernet port number 1 or 2.
XX = Ethernet port number 1 or 2.
XX = MU MAC (xx:xx:xx:xx:xx:xx) address.
XX = Wireless client MAC (xx:xx:xx:xx:xx:xx)
address.
<YY> = Reason code number (integer).
XX = MAC (xx:xx:xx:xx:xx:xx) address of the
MU.
YY = Name (string) of the access port.
3-3