Directory; Emergencymode; Execute - Symbol WS5000 Troubleshooting Manual

2-10
WS5000 Series Switch Troubleshooting Guide

2.2.12 directory

Lists the image and configuration files that are stored on the WS5000. As a shortcut, "dir" can be used instead
of "directory".
Syntax
directory
Parameters
None.
Example
SM-WS5000> directory
Date & Time Bytes
Sep 24 13:01
Sep 21 09:53
Sep 10 13:25
Sep 22 08:34
Sep 17 15:23 16979643
Sep 10 12:49
SM-WS5000>

2.2.13 emergencymode

Enables or disables the "Emergency" Switch Policy (ESP). This is a switch policy that can activated (enabled)
at any time in case of an emergency. When ESP is deactivated (disabled), the previous switch policy is
reactivated.
Define an Emergency switch Policy prior to enabling the Emergency Wireless Switch Policy. Create two or
more switch policies. An error message displays if less than two Switch Policies are available.
Syntax
emergencyMode <enable_flag>
Parameters
enable_flag
Example
SM-WS5000> emergencyMode enable

2.2.14 execute

Executes the specified file. The command is used with specified optimization (patch file) files provided from
Symbol Technologies when a service upgrade is needed on the WS5000 Series Switch.
Syntax
execute
Parameters
None.
Example
SM-WS5000> execute
File Name
1418 CmdProcErrors.txt
0 KerberosErrorLog.txt
16221 WS5000Defaults_v1.4.1.0-003D.cfg
0 WS5000Defaults_v1.4.1.0-003D.cfg.current
WS5000_v1.4.1.0-003D.sys.img
7490 cmd_template.sym
Indicates whether to enable or disable the ESP. Possible values are:
• enable
• disable