Shell - Symbol WS5000 Troubleshooting Manual

Example
SM-WS5000> save configuration backupsystem
Saving running configuration in: backupsystem.cfg
Saving Wireless Network Management Configuration ...
Done.
SM-WS5000>

2.2.22 shell

The command allows the user to enter into the embedded OS Command prompt and environment.
Syntax
shell
Parameters
None.
Example
SM-WS5000>shell
2.2.23 show
Displays a list of details about the WS5000 system related to the chosen display_parameter.
Syntax
show <display_parameter>
Parameters
display_parameter
Example
SM-WS5000> show ?
Syntax: show <display_parameter>
show accessports
show acl
show allconfig
show appolicy
show ce
show cg
show channelinfo
show chassis
show configaccess
show cpuUsage
show debuglog
show ethernet
show etherpolicy
show events
show ftp
show host
The keyword used with the show command displays details related to the
display_parameter. See the Example, below, for a list of all available parameters and
brief descriptions. For more details on displayed information,refer to the WS5000 Series
Switch System Reference Guide.
Alternatively, enter the command followed by a ? symbol. For example:
show accessports ?
Display access port details
Display ACL information
Display all config details
Display Access Port Policy
Display Classifiers
Display Classification Group
Display channel no and country code details
Display Chassis details
Display configured system access restrictions
Displays CPU Usage
Display the current dynamic debug log
Display Ethernet Port details
Display EtherPolicy details
Show Syslog event details
Display FTP status
Display the Hosts defined in the system
Service Mode CLI Commands 2-15