Check; Clear; Configure - Symbol WS5000 Troubleshooting Manual

Syntax
capture <sysstat>
Parameters
<sysstat>
Example
SM-WS5000> capture sysstat
Capturing current system status....
Starting the SSM capture ...
Finished the SSM capture ...
SM-WS5000>

2.2.5 check

This command checks the integrity of the system image installed. It
and verifies that it matches with the records supplied with system image.
Syntax
check install
Parameters
install
Example
SM-WS5000> check install
Total failures =
SM-WS5000>

2.2.6 clear

Clears the screen contents and returns to the service mode prompt.
Syntax
clear
Parameters
None.
Example
SM-WS5000> clear
SM-WS5000>

2.2.7 configure

The command changes the Service Mode CLI to the Service Mode "Configuration" context, allowing the
administrator to configure system attributes within the Service Mode. The sub-contexts and related commands
Saves the system status to a file.
This is a mandatory parameter and is the only parameter available to the check
command, currently.
0
Service Mode CLI Commands
calculates the MD5 check sum of all the files
2-5