Or Help - Symbol WS5000 Troubleshooting Manual

Table 2.1 Service Mode Command Review (Continued)
Command
delete
description
directory
emergencymode
execute
install
launch
name
password
ping
restore
save
shell
show
watchdog

2.2.1 ? or help

Displays a list of available commands. Identical to "help" command.
Syntax
?
Parameters
None.
Example
SM-WS5000> help
System Context.
----------------------------------------------
Commands
----------------------------------------------
? or help
logout or bye
exit
capture
check
clear
configure
copy
debug
delete
description
Brief Description
Delete an image files from the memory
Set description text
Display the available image files in memory
Enable or disable Emergency Mode
CLI Service Mode command file execution
Install primary/standby or Kerberos config
Launches the specified program
Set or change the name.
Change the CLI Service Mode password
Ping a network host/IP address
Restore system image or configuration.
Save the running system configuration to a file
Enter into the embedded OS command prompt
Display context specific attributes
Enable/disable watch dog
Brief Description
To get the command information.
Close this session.
Exit from the Service CLI mode.
Capture the current system status to a file.
Check system integrity.
Clears the screen.
Configure system attributes.
Copy files between the Switch and TFTP/FTP server.
Enable/disable debug information to the log file.
Delete an image files from the memory.
Set description text.
Service Mode CLI Commands 2-3
Ref.
page 2-9
page 2-9
page 2-10
page 2-10
page 2-10
page 2-11
page 2-11
page 2-12
page 2-12
page 2-12
page 2-14
page 2-14
page 2-15
page 2-15
page 2-16