Debug - Symbol WS5000 Troubleshooting Manual

2-8
WS5000 Series Switch Troubleshooting Guide
IP address of the TFTP server : 10.1.1.1
Copying 'backup.sys.img' from tftp://10.1.1.1 to Switch...
or
SM-WS5000> ftp://100.10.10.1/ftpimages/DefaultConfig.cfg system
Copying 'DefaultConfig.cfg' from ftp://100.10.10.1/ftpimages/ to Switch...

2.2.9 debug

Allows enabling or disabling logging of debug messages in the debug log file. User must execute the debug
command to see the log of the operating function. Entering a specific option displays the debug option that is
enabled.
Syntax
debug <option> <enable/disable>
Parameters
Option Parameter
errors enable|disable
general enable|disable
threads enable|disable
sharedmem enable|disable
accessport enable|disable
ess enable|disable
policy enable|disable
ethernet enable|disable
stats enable|disable
snmp enable|disable
driver enable|disable
standby enable|disable
frames enable|disable
all enable|disable
Example
SM-WS5000> debug sharedmem enable
Enabling SHARED MEMEORY data logging ...
Status: Success.
Debug flag value (Hex): 00000151
Enabled options are:
-------------------
Description Option
Error messages events
General messages corba
Process thread info packets
Shared memory data apfirmware
Access Port info mu
ESS handling xml
Policy handling qos
Ethernet data vlan
Statistical data database
SNMP data security
Driver messages memory
Standby info kdc
Frame info acs
Select all of the options
Parameter Description
enable|disable Events info
enable|disable CORBA handling
enable|disable Packets data
enable|disable AP firmware info
enable|disable Mobile unit data
enable|disable XML info
enable|disable QOS handling
enable|disable VLAN handling
enable|disable Database info
enable|disable Security handling
enable|disable Memory use info
enable|disable Kerberos messages
enable|disable ACS info