Copy - Symbol WS5000 Troubleshooting Manual

switchpolicy
telnet
user
watchdogtimer
wlan
SM-WS5000.(Cfg)>

2.2.8 copy

Copies a file (system image (*.img) or configuration file (*.cfg) from the WS5000 to a (T)FTP server, or vice
versa. TFTP can be used to transfer
, , and
.sys.img .cfg .sym
IMPORTANT! DO NOT USE THIS COMMAND FOR FILES LARGER THAN 32MB.
!
Syntax
For TFTP:
copy <source> <destination>
For FTP:
copy <source> <destination> [ -u <ftp_user> ] [ -m <ftp_mode> ]
Parameters
source
destination
ftp_user
mode
Example
SM-WS5000> copy tftp system
Enter the file name to be copied from TFTP server : backup.sys.img
Configure Switch Policy.
Configure system Telnet settings.
Configure user information.
Enable/disable watch dog timer
Configure WLAN for the system.
, , and
*.sys.img *.cfg
files.
The source of the file. Possible values are:
• [protocol:]//<hostname or IP address>/[filename]. For example,
ftp://<ipAddress/path/[file_name]. If a filename is not supplied, the system will
prompt for one, in addition to a password.
• tftp
• ftp
• system
• .
• <filename, including path>
The destination of the file. Possible values are:
• tftp
• ftp
• system
• .
• /
• [protocol:]//<hostname or IP address>
FTP username. Default is anonymous.
FTP transfer mode, either ascii or binary. Default is binary.
Service Mode CLI Commands
files. FTP can be used to transfer
*.sym
2-7
,
.krb