Symbol WS5000 Troubleshooting Manual page 28

2-6
WS5000 Series Switch Troubleshooting Guide
available in the normal System Context (WS5000> prompt) are the same. One additional command, however,
is the launch command, which is also available at the Service Mode root Content (SM-WS5000> prompt).
For more details on all of these sub-contexts and available commands, refer to the WS5000 Series Switch
System Reference Guide.
Syntax
configure
Example
SM-WS5000> configure
SM-WS5000.(Cfg)> ?
Config Context.
----------------------------------------------
Commands
----------------------------------------------
.. or end
exit
? or help
logout or bye
accessport
acl
appolicy
ce
cg
chassis
clear
copy
date
delete
description
directory
emergencymode
ethernet
etherpolicy
events
ftp
host
install
kdc
launch
name
np
ping
po
radius
reset
restore
runacs
save
securitypolicy
set
show
shutdown
snmp
ssh
ssl
standby
Brief Description
Go back to the previous context.
Go back to root context.
To get the command information
Close this session
Configure an Access Port.
Configure ACL for the system.
Configure an Access Port policy.
Configure a Classifier.
Configure a Classification Group.
Configure Chassis settings.
Clears the screen
Copy files between the Switch and TFTP/FTP server.
Set or display system time and/or date
Delete an image files from the memory
Set description text.
Display the available image files in memory
Enable or disable Emergency Mode
Configure Ethernet Port.
Configure an EtherPolicy.
Configure Event properties.
Configure system FTP settings.
Configure Host properties.
Install primary/standby or Kerberos config.
Configure KDC server.
Launches the specified program
Set or change the name.
Configure a Network Policy.
Ping a network host/IP address
Configure a Policy Object.
Configure RADIUS setting.
Reset Switch
Restore system image or configuration.
Run ACS on all adopted Access Ports
Save the running system configuration to a file.
Configure Security Policy for the system.
Set Switch attributes
Display context specific attributes
Shutdown the Switch
Configure SNMP parameters.
Configure SSH settings.
Configure SSL settings.
Configure system Standby settings.