Logout Or Bye; Exit; Capture - Symbol WS5000 Troubleshooting Manual

2-4
WS5000 Series Switch Troubleshooting Guide
directory
emergencymode
execute
install
launch
name
password
ping
restore
save
shell
show
watchdogtimer
SM-WS5000>

2.2.2 logout or bye

Exits service mode and logs the user out of the switch. Identical to the command "bye".
Syntax
bye
Parameters
None.
Example
SM-WS5000> bye
Logging out...
user name:

2.2.3 exit

Exits the CLI Service Mode and returns to the switch command prompt (normal CLI).
Syntax
exit
Parameters
None.
Example
SM-WS5000> exit
Disabling CLI Service Mode commands...... done.
WS5000>

2.2.4 capture

This command saves the current system status of various tables, files and processes of the switch to a file, for
use by Symbol engineers during problem resolution. The file name, ssm_report, appears in the WS5000/
scripts/service/ directory. Any previous ssm_report file gets renamed to ssm_report.prev.
After capturing the system status, it can be displayed by using the show sysstat command.
Display the available image files in memory.
Enable or disable Emergency Mode.
CLI Service Mode command file execution.
Install primary/standby or Kerberos config.
Launches the specified program.
Set or change the name.
Change the CLI Service Mode password.
Ping a network host/IP address.
Restore system image or configuration.
Save the running system configuration to a file.
Enter into the embedded O.S. command prompt.
Display context specific attributes.
Enable/disable watch dog timer.