Advanced Programming Mode - Omron I537-E2-01 User Manual

‹

Advanced Programming Mode

In advanced programming mode, all Inverter parameters can be monitored and set.
parameters can be changed from the setting displays. Use the Increment, Decrement and Digit Selection/
RESET keys to change the frequency. The user parameter will be written and the display will return to moni-
tor display when the ENTER key is pressed after changing the setting.
Refer to Chapter 5 Parameters for details on the parameters.
„
Example Operations
Key operations in advanced programming mode are shown in the following figure.
Mode Selection display
Advanced Programming Mode
Function Selection Display
Setup settings
PI controlbox: b5-xx PI Control mode selection
Copy functions: o3-xx
Fig 3.6 Operations in Advanced Programming Mode
Monitor Display Setting Display
Language
Access level
Initialize
Proportional Gain
PI feedback command
loss detection time
Copy function selection
Read permitted selection
Modes
9
3-