15
WHEELS, TIRES
–
Position the brake calipers.
The brake linings are correctly positioned.
–
Mount screws
–
Operate the hand brake lever repeatedly until the brake linings are in contact with the
brake disk and there is a pressure point. Fix the hand brake lever in the activated posi-
tion.
The brake calipers straighten.
–
Tighten screws
M00915-12
Guideline
Screw, front brake caliper
–
Remove the fixation of the hand brake lever.
–
Position the wheel speed sensor
–
Mount and tighten screw
Guideline
Remaining chassis screws
–
Take the motorcycle from the front lifting gear. (
–
Remove the rear of the motorcycle from the lifting gear. (
M00914-12
on both brake calipers but do not tighten yet.
on both brake calipers.
M10
in the drill hole.
.
45 Nm
Loctite
(33.2 lbf ft)
M6
10 Nm (7.4 lbf ft)
p. 94)
p. 92)
136
®
243™