Raising The Motorcycle With The Work Stand (Inserted) - KTM 1050 Adventure Owner's Manual

13 SERVICE WORK ON THE CHASSIS
13.5

Raising the motorcycle with the work stand (inserted)

Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
Finishing work
–
Install the bottom triple clamp cover. (
–
Fold up the rider footrests and secure them.
–
Allow the work stand
pivot.
Work stand (62529055000)
Info
Set the work stand to an appropriate height and width.
–
Raise the motorcycle.
–
Check that the work stand is properly seated.
M00927-10
p. 108)

with plastic bushing to engage in the opening of the swingarm
95