Extended Settings And Functions; Installation - Mirage smartSTREAM - BOX2IP User Manual

 Switch the channel directly on your mobile device.

During smartSTREAM mode (BOX2IP mode) you can switch off your TV set.
9

Extended Settings and Functions

9.1

Installation

The default settings apply to a standard satellite system. Any further system functions (e.g.
unicable system or motor antenna) should be manually set in the menu Installation:

CAUTION!
9.1.1 Antenna Connection
1. In the menu Installation, select the submenu Antenna Connection and confirm by
pressing OK.
2. Select by using the keys
connected to the receiver.
3. Press EXIT to leave the submenu Antenna Connection.
4. Press EXIT again to leave the menu Installation and to return to TV operation, or go to
another submenu

9.1.2 Satellite List
The submenu Satellite List states a preset list of possible satellites. Depending on your
antenna system you can select the satellites used for receiving channels:
1. In the menu Installation, select the submenu Satellite List and confirm by pressing OK
2. Select the satellite you want to receive by pressing the keys PR+ and PR-, and confirm
by pressing OK.
The selected satellite will be correspondingly marked ( ).

To change an entry:
1. Press the red function key (SHIFT).
In case of doubt, have those settings being made by an expert. Usu-
ally, there are no required settings within scope of normal use of the
system.
and
Motor Antenna
If you selected a
configured at the menu item Antenna Setup.
You may also edit the satellite list by selecting
one of the buttons on the right edge of the
menu window.
Extended Settings and Functions
Fixed Antenna
if a or a
, then such antenna should be further
Motor Antenna
is
39