Flashforge Finder User Manual page 6

② Do not touch the nozzle
③ Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing
and gloves away from moving parts.
④ Do not operate the device while you are tired or under the influence of drugs,
alcohol or medication.
·Cautions
① Do not leave the device unattended for long.
② Do not make any modifications to the device.
③ To lower the build plate before loading/unloading filament. (The distance between
the nozzle and build plate should be kept for at least 50mm)
④ Operate the device in a well-ventilated environment.
⑤ Do not touch the nozzle and build plate during operation.
⑥ Never use the device for illegal activities.
⑦ Never use the device to make any food storage vessels.
⑧ Never use the device to make any electrical appliance.
⑨ Never put the model into your mouth.
⑩ Do not remove the models with force.
· Environment Requirements
Temperature: RT 15-30℃
Moisture: 20%-50%
· Filament Requirements
Do not abuse the filament. Please make sure you use the Flashforge filament or the
filament from the brands accepted by Flashforge.
6
Finder User Guide | www.ff3dp.com