Flashforge Finder User Manual page 56

shows the current actual temperature of corresponding part. After start heating, the
below curve of temperature form will start to change, different color correspond
different parts' temperatures
② Update Firmware
Every time when you start Flashprint, it will automatically detect and download the
up-to-date firmware. If any update is available, a dialog box will pop up for reminding
the users to update.
Step 1: Click [Tools]--[Update
updating firmware. If software and printer are already in connection, it reminds you
cutting off the connection, choose
Step 2: Choose corresponding printer type and firmware version and click
the firmware updating box. After confirming the printer is in free state, the software
will automatically update the firmware.
Finder User Guide | www.ff3dp.com
firmware]. It needs to cut off connection before
[Yes] and go on to the next step.
56
[OK] in